{"id":13666,"date":"2026-11-11T13:28:58","date_gmt":"2026-11-11T13:28:58","guid":{"rendered":"https:\/\/www.ebazagardens.com\/?post_type=glc_project&p=13666"},"modified":"2026-11-11T13:28:58","modified_gmt":"2026-11-11T13:28:58","slug":"home-playground-installation-ash-sharq-riyadh","status":"publish","type":"glc_project","link":"https:\/\/www.ebazagardens.com\/en\/project\/home-playground-installation-ash-sharq-riyadh","title":{"rendered":"Outdoor Home Playground Installation in Ash Sharq, Riyadh"},"content":{"rendered":"

When we first arrived at this property in Ash Sharq, there was no playground to speak of: just a wide stretch of open, sandy ground behind a private home, fenced on all sides and waiting for a purpose. The family\u2019s request was straightforward. They wanted a proper outdoor play area where several children of different ages could play at once, without anyone needing to drive to a public park.<\/span><\/p>\n

Ebaza Gardens<\/strong> handled the whole job, from marking out the ground to the final walk-through. This case study explains how we built the playground, what went into it and what the family gained. If you are planning an <\/span>outdoor home playground in Riyadh<\/b>, this gives you a realistic view of how a project like this comes together.<\/span><\/p>\n

Scope of Work: How We Built It<\/b><\/h2>\n

An open site gives you freedom, but it also means you must create everything yourself: boundaries, a play surface and secure footings. Our process ran in this order.<\/span><\/p>\n

    \n
  1. Marking out and zoning.<\/b> We walked the plot with the family and decided where the big structures should stand. The play tower went on one side and the swing sets were placed apart from it, so a child swinging back and forth never ends up in the path of a child sliding down.<\/span><\/li>\n
  2. Building the play bed.<\/b> We defined the play area with a continuous border of grey stone curbing, then filled it with clean, soft sand. The curb keeps the sand where it belongs and gives the playground a clear, finished edge against the surrounding ground.<\/span><\/li>\n
  3. Setting the footings.<\/b> Every upright post stands on its own round concrete footing. We poured and leveled these before mounting the frames, because swings pull hard on their legs with every swing and the footings are what keep a frame from shifting over time.<\/span><\/li>\n
  4. Assembling the structures.<\/b> We bolted the tower together level by level, then attached the platforms, safety rails, access steps and slides. Next we raised the two swing frames and hung the chains and seats.<\/span><\/li>\n
  5. Adding the finishing pieces.<\/b> The playhouse was placed at the edge of the play bed, and a floodlight on a pole was set up so the area remains usable after sunset.<\/span><\/li>\n
  6. Final inspection.<\/b> We checked every bolt, chain link, hanger and slide joint, looked for sharp edges, and confirmed that each slide had open space at its exit.<\/span><\/li>\n<\/ol>\n

    Equipment Installed<\/b><\/h2>\n

    The aim was to give each child something different to do, so nobody has to wait long for a turn.<\/span><\/p>\n